CNC 65mm Spindle Dust Collection Boot

I needed a new dust boot since upgrading to a 65mm spindle as the one I got from the CNC company didn't really work anymore. I looked here and found the Dust Collection Boot from @Shipwreck0316. I printed it off but it didn't fit the spindle I had to i modified this to fit the spindle better. It now goes around the bottom part of the spindle to attach to the body of the spindle.

I also combined the router holder and the vacuum hose outtake. I felt there was no need for a separate item. Plus I didn't want to spend the money on extra things like the m3 screws etc. The hose and the boot will attach with a hose clamp like this one https://thd.co/3IieeW3

I also tweaked the depth of the brush holder to accommodate a more widely available brush which you can find on Amazon: https://www.amazon.com/gp/product/B07QPJ2D95/ref=crt_ewc_title_dp_1?ie=UTF8&psc=1&smid=A31K8VU2VR0FDT

You will also need some 6x2mm magnets for the boot and the brush shoe to connect. https://www.amazon.com/gp/product/B07QPJ2D95/ref=crt_ewc_title_dp_1?ie=UTF8&psc=1&smid=A31K8VU2VR0FDT