Elemnt Bolt aerobar mount

This is an aerobar mount for wahoo elemnt bolt (works with v2, and likely v1)
It is a mashup of NACA 0018 airfoil with wahoo's own reference mount design.
Bar distance is 87mm center to center, and bar diameter is 22mm. (I can modify if there is demand)

To build this, you will need:

• 2 printed parts: the airfoil and the Bolt mount
• 2 small countersunk M3 screws
• 2 slightly longer slotted M3 scres
• 2 short M3 brass inserts (3mm)
• 2 normal M3 brass inserts (5mm), the short ones will work also

When printing make sure the airfoil is printed vertically, forward side down, see reference screencap. The bolt mount is printed horisontally as normal. Use buildplate support only.